Maretron SSC200 Manuel d'utilisateur télécharger pdf (Page 10)

SSC200 User’s Manual

Page 6 Revision 1.8

NMEA 2000 / Power

Connector

NMEA 0183 Connector

Figure 3 – NMEA 2000

/ NMEA 0183 Interface Connector Locations

2.4.1 Connecting to NMEA 2000

Interface

The Maretron SSC200 provides a connection to an NMEA 2000

interface through a five pin

male connector (Figure 4). You connect the SSC200 to an NMEA 2000

network using a

Maretron NMEA 2000

cable (or compatible cable) by connecting the female end of the cable

to the SSC200 (note the key on the male connector and keyway on the female connector) as

shown in Figure 5 below.. Be sure the cable is connected securely and that the collar on the

cable connector is tightened firmly. Connect the other end of the cable (male) to the NMEA

2000

network in the same manner. The SSC200 is designed such that you can plug or unplug

it from an NMEA 2000

network while the power to the network is connected or disconnected.

Please follow recommended practices for installing NMEA 2000

network products.

Figure 4 – NMEA 2000

/Power Connector Face Views

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 44 45

Pas de commentaire

Maretron SSC200 Manuel d'utilisateur Page 10