Maretron RAA100 Guide d'installation télécharger pdf (Page 34)

www.maretron.com 1-866-550-9100

34

The TLA100 is used to adapt

commercially available resistive

tank senders to the NMEA 2000

®

network. This allows you to observe

tank levels anywhere on the vessel

where there are NMEA 2000

®

compatible displays such as the

Maretron DSM250.

The TLA100 is compatible with both

the American standard (240-30 ohm)

and the European standard (10-180

ohm) resistive senders. In fact, the

TLA100 can be calibrated for any

resistance between 0 and 300 ohms.

Unlike most tank senders that

only work with rectangular tanks,

the TLA100 can be calibrated

for irregular tank shapes so you

know the true level of the tanks.

You can also use the TLA100 with

analog gauges at the same time as

NMEA 2000

®

so you don’t have to

give up existing analog gauges to

enjoy the advantages of digitally

networked information.

The Maretron TLA100 has the

following features:

• NMEA 2000

®

Interface

• Adapts American standard (240-30 ohm)

resistive senders to NMEA 2000

®

Network

• Adapts European standard (10-180 ohm)

resistive senders to NMEA 2000

®

Network

• Calibrated for any Resistance Range from

0 to 300 Ohms or 300 to 0 Ohms

• Accommodates Irregularly Shaped Tanks

with 16 Point Calibration

• 16 Programmable Tank Types Including

Fuel, Fresh Water, Waste Water, Live Well

• Programmable Tank Number(s) Up to 16

per Tank Type

• Programmable Tank Capacity

• Works Alongside of Analog Gauges

• Can be Used Standalone without

Analog Gauges

TLA100

Tank Level

Adapter

Products

PART NUMBER DESCRIPTION

TLA100-01 Tank Level Adapter

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 81 82

Commentaires sur ces manuels

Pas de commentaire